Aluminum Profile 3 Axis Heavy Duty CNC Machining Center

Aluminum Profile 3 Axis Heavy Duty CNC Machining Center

three axis hefty obligation aluminum cnc BT40 device centre

Major Attributes:

one, CNC processing center BT40 is an built-in mattress, making use of Q235A welding or epoxy resin sand casting method manufacturing mattress body, and right after warmth setting remedy to make certain lengthy time precision and steadiness.

two, the CNC machining heart BT40 adopts the integrated design and style of the whole control cabinet and the human body, which is practical for transportation, installation and operation, and has higher security.

three, the optional established of chain variety chip technique, straightforward to cleanse.

four, set multi-station processing, high effectiveness.

five, tools X, Y, Z axis positioning pace up to 60m/min, 30m/min, 30m/min.

6. The cable tank chain, the manual rail of each axis and the travel rack and the screw rod undertake the total safety construction, which properly prevents the processing of the particles from getting into and tremendously enhances the daily life of the transmission elements.

seven, equipped with guidebook rail automated lubricating technique, practical routine maintenance.

eight. Themicrolubrication method of the chopping device or the cooling method of the slicing liquid h2o cooling method can effectively shield the instrument and enhance the life of the cutter, and configure the oil-h2o separator (the cooling circulation system of the cutting liquid water) to efficiently separate the lubricating oil in the chopping fluid and efficiently improve the provider daily life of the cutting fluid.

nine, the primary shaft adopts the original ZheJiang number grid brand name, the maximum pace can reach 12000RPm, and its efficiency and existence are significantly increased than that of related merchandise.

ten, the knife magazine is outfitted with the unique model of ZheJiang first round, outfitted with24 bit tool bit, and the velocity of adjacent device changing is two seconds.

eleven, with rigid tapping purpose, rapidly processing speed and high accuracy of tapping.

twelve, the servo spindle motor can output 35.8Nm at highest pace, and the speed can achieve 12000rpm, which is ideal for steel large load machining and copper and aluminum alloy material processing.

thirteen. The original FANUC CNC technique is easy in procedure and large instability and practicality. At the identical time, the method of resource existence administration is configured separately to facilitate the lifestyle management of the instrument.

fourteen, equipped with the oil-h2o separator to separate oil and h2o immediately.

fifteen, outfitted with a protecting security door to guarantee the protection of the operator and prevent the splashing of waste liquid.

16, the program can reserve the manipulator interface to cooperate with the improve of manipulator.  


X(Stroke for X axis) 4500mm~12500mm as option
Y(Stroke for Y axis) 500/600mm
Z(Stroke for Z axis) 500mm
(Spindle Speed) 12000 RPM
(Spindle Taper) BT40
(Capacity Of Equipment Magazine) 24
(Device Modify Time) two.(two. sec)
 MOVING Velocity
X(X Axis Transferring Velocity) 60m/min
Y(Y Axis Moving Velocity) 30m/min
Z(Z Axis Relocating Velocity) 30m/min
X/Y/Z(X/Y/Z Feeding Pace) one-1500mm/min
(Spindle Pushed Motor) seven.five kw
X/Y/Z(X/Y/Z Driven Motor) three. kw


(Lubricating System)  
(Cooling Method) /(Water Cooling System)
X (Situation Precision Of X Axis) ±0.05 mm ()
Y/Z (Place Precision Of Y /Z Axis) ±0.02 mm
(Repeating Placement) ±0.02 mm
 SIXE OF Machine
(Electricity Provide) AC  380V  50Hz
(Electricity) 20KW
(Air Strain) .5MPa – .8MPa
(Peak) 2600 mm 
(Weight) 5000 kg~22000KG
(Location) 9300mm×2600mm×2700mm (4500mm)
(Operation Program) FANUC 0I MF Program
(Serve Motor) FANUC β
(Spindle Motor) FANUC,7.5KW,12000 RPM
(Spindle) BT40,12000RPM
(Resources Magazine) (HAND WHEEL Industry)24TURRET
(Xihu (West Lake) Dis. Rails) THK
(Ball Screw) TBI C5
(CZPTal Components) Schneider
(Pneumatic Parts) AIRTAC
(Reducer) ATG

Parker Organization:

Aluminum Profile 3 Axis Heavy Duty CNC Machining Center


Leaf Chain

As one of the leading leaf chain manufacturers, suppliers, and exporters of mechanical products, We offer leaf chains and many other products.

Please contact us for details.

Manufacturer supplier exporter of the leaf chain.

Recent Posts